Specifications
ApplicationofInverter Frenic - Aqua |
Water purification plant and wastewater, clean water and sewage treatment plants, Irrigation system, Seawater desalination, Pump, Blower, Fluid-pressure device |
Power supply |
3-phase, 380 to 480V, 50/60Hz |
Rated capacity |
90kW |
Ratedcurrent |
237A |
Output frequency range |
25 to120.0Hz |
Starting Torque |
100% or more/set frequency: 1.0Hz |
Overload current rating |
110%-1min |
Control Method |
V/f control Dynamic torque vector control V/f control, slip compensation provide |
Braking unit |
- |
Input |
Analog input: 0~±10VDC, 0~20mADC; Digital Input: Multi-step frequency selection (0~1steps) Multi-step frequency selection (0~3steps) Self-hold selection Coast-to-stop command Alarm reset Local (keypad) instruction selection Frequency setting 2/frequency setting 1 Digital input common |
Ouput |
current, voltage, signal, terminal, PID, rating, alarm, circuit. |
Protection Function |
Motor Protection, Momentary Overcurrent Protection, Overload Protection, Overvoltage Protection, Undervoltage Protection, Momentary Power Loss Ride -Thru, Heatsink Overheat Protection, Braking Resistance Overheat Protection, Stall Prevention, Ground Fault Protection: Protection by electronic circuit |
Main Control Functions |
Main function: Slow flowrate function.
Other featured functions:4PID control,Control of maximum starts per hour,Abnormal pressure rise prevention,End of curve detection,Pick-up operation
|
Communication |
RS-422 /485 (MEMOBUS/Modbus at 115 .2 kbps) standard on all models. |
Peripheral Devices and Options |
LCD Operator, AC Reactor, DC Reactor, Braking Unit, Braking Resistor, noise filter... |
Degree of protection |
IP 00 open - chassis, IP 21 NEMA Type 1 enclosure, IP55 |