Omron Photo Sensor E3T series E3T-SL21R 2M
Series: Omron Photo Sensor E3T series
Specifications
|
Type |
Convergent-reflective |
|
Power supply |
12 to 24 VDC ±10%, ripple (p-p) 10% max. |
|
Sensing distance |
5 to 30 mm (50 ×50 mmwhite paper) (Limited-reflective) |
| Response time |
6 mm max
|
|
Standard sensing object |
- |
|
Light source |
Red LED (650nm)
|
|
Operating modes |
Light-ON, |
|
Output |
Load power supply voltage: 26.4 VDC max. Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA) Open-collector output |
|
Indicators |
Operation indicator(orange), (green) |
|
Response time |
Operate or reset: 1 ms max |
|
Sensitivity adjustment |
- |
|
Protection circuits |
Power supply and control output reverse polarity protection, Output short-circuit protection, Mutual interference prevention |
|
Connections |
Pre-wired (standard length: 2 m) |
|
Accessories |
Instruction manual, Set screwsfor mounting (M2 ×14), Nuts* (Limited-reflective) (*Only the Instruction Manualis included with an M3-mounting Sensor (E3T-FD_ _M or E3T-SL_ _M). Order the Set of Mounting Screws separately if required)
|
|
Degree of protection |
IP67 (IEC 60529) |
|
Standards |
IEC, CE |
Installation guide Omron Photo Sensor E3T series Contact mailbox baoan@baoanjsc.com.vn or phone number 0989.465.256
Document of Omron Photo Sensor E3T series
Comment about product
Related Articles
Processing, please wait ...
