Omron Photo Sensor E3T series E3T-ST14M-L 2M
Series: Omron Photo Sensor E3T series
Specifications
|
Type |
Through-beam (Emitter + Receiver) |
|
Power supply |
12 to 24 VDC ±10%, ripple (p-p) 10% max. |
|
Sensing distance |
1m |
|
Differential travel |
6mm max,15% or less of the sensingdistance (Diffuse-reflective) 2mm max., 6mm max. (Limited-reflective)
0.15-mm dia. non-glossy object(sensing distance 10mm) (BGS-reflective)
|
|
Standard sensing object |
Opaque, 2-mm dia. min |
|
Light source |
Red LED(650nm), (Through-beam) |
|
Operating modes |
Dark-ON |
|
Output |
-Through-beam: Load power supply voltage: 26.4 VDC max. Load current: 50 mA max.
Open-collector output
Load power supply voltage: 30 VDC max.
Load current: 80 mA max.(residual voltage: 1 V max.) Open-collector output |
|
Indicators |
Operation indicator(orange) |
|
Response time |
Operate or reset: 1 ms max.,Operate or reset: 0.5 ms max. |
|
Sensitivity adjustment |
- |
|
Protection circuits |
Power supply and control output reverse polarity protection,output short-circuit protection, mutual interference prevention |
|
Connections |
Pre-wired (standard length: 2 m) |
|
Accessories |
- Instruction manual, Set screws for mounting (Side-view Sensors: M2 ×14, Flat Sensors: M2 ×8), Nuts, Hexagonal nuts, Toothed washers (Through-beam) |
|
Degree of protection |
IEC 60529 IP67,IEC 60529 IP65 |
|
Standards |
IEC, CE |
Installation guide Omron Photo Sensor E3T series Contact mailbox baoan@baoanjsc.com.vn or phone number 0989.465.256
Document of Omron Photo Sensor E3T series
Comment about product
Technology solutions
Processing, please wait ...
