Type |
Fiber Amplifiers |
Standard sensing object |
Opaque |
Amplifier unit type |
Standard type |
Light source (wave length) |
Red LED (625 nm) |
Power supply voltage |
12...24VDC |
Sensitivity setting |
Auto tuning |
Number of control outputs |
1 |
Output type |
PNP open collector |
External input |
No |
Operation mode |
Dark-ON, Light-ON |
Response time |
1ms, 16ms, 250µs, 50µs, 55µs |
Display type |
7 segment LED |
Display value |
Dual digital display |
Protection circuit |
Output short over current protection circuit, Reverse output polarity protection, Reverse power protection circuit |
Function |
Automatic power control (APC), Differential detection, Dynamic power control (DPC), Eco mode, Mutual interference prevention, Power tuning, Resetting settings, Timer, Zero reset |
Case material |
Polycarbonate (PC) |
Mounting type |
DIN Rail mounting |
Connection type |
Pre-wired |
Operating ambient |
Standard |
Ambient illumination |
Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max. |
Ambient temperature (with no icing or condensation) |
-25...55°C |
Ambient humidity (with no condensation) |
35...85% RH |
Approx. weight |
65g |
Overall width |
10mm |
Overall height |
33.5mm |
Overall depth |
76.9mm |
Degree of protection |
IP50 |
Representative standard |
CE, IEC |
Standard accessories |
No |
Separately accessories |
DIN Track: PFP-100N, DIN Track: PFP-100N2, DIN Track: PFP-50N, End Plate: PFP-M, Mounting Bracket: E39-L143 |
Compatible device |
E32 series |