Cordless hammer driver drill MAKITA DHP486 series 

Type

Hammer drill

Shape type

Pistol

Operation mode

Drilling, Fastening, Hammer drilling

Power source

Battery

Power source voltage

18VDC

Number of included batteries

0, 2

Battery capacity

5.0Ah

Working materials

Masonry, Steel, Wood, Plastic

Drilling capacities (Steel)

13mm

Drilling capacities (Wood)

50mm (Auger-Bit), 76mm (Self-feed bit), 152mm (Hole saw)

Drilling capacities (Masonry/Concrete)

16mm

Rotation direction

Clockwise, Counter clockwise

Fastening torque

65Nm (Soft), 130Nm (Hard)

Number of speed levels

Variable speed

No load speed

0...2100rpm, 0...550rpm

Impact rate

0...31500bpm, 0...8250bpm

Max. lock torque

125N.m

Max. fastening torque

130Nm

Chuck type

Keyless

Tool holder size

1.5...13mm

Tool holder

Round

Feature

No battery, charger, Model DHP486 is a cordless hammer driver drill powered by 18V LXT Li-Ion battery and developed, based on the current model DHP481, as a high-end model, Increased performance in continuous heavy-duty applications, Achieved by changing the motor winding and gear ratio, Compact design with an overall length 27mm shorter than the current model, Increased max clutch torque enables to adjust clutch torque even when tightening fasteners into hard material

Approx. weight

2.3…2.7kg

Overall width

81mm

Overall height

217mm, 265mm

Overall length

178mm

Standard accessories

Stopper pole ass'y (DHP486 only): 122576-8, Grip assembly: 127701-6, Hook: 346317-0, +- BIT 2-45: 784637-8, Bit holder (452947-8), 2xBattery cartridge: BL1850B, Charger: DC18RC

Separately accessories

DHP486 name plate: 811B29-1, Leaf spring: 232220-0, Speed change lever assembly: 127494-5, Compression spring 4: 233438-6, Flat head screw M6x22: 251468-5, Keyless drill chuck 13: 763252-1, Gear assembly: 127698-9, Gear assembly: 122A92-6, Gear assembly: 122B68-9, Tapping screw 4x18: 266326-2, Rotor: 619656-4, Stator complete: 629A33-8, Rear cover: 413405-9, Tapping screw bind pt 3x16: 266130-9, F/r change lever: 419041-9, Switch C3JR-4B: 651443-5, Terminal: 643874-2, DHP486 serial no. label: 811B36-4, Cushion: 424517-3, Led circuit: 620549-0, Housing set: 183R83-4, Rubber pin 6: 263005-3, Handstrap: 163400-6, Stopper pole ass'y: 122576-8, Grip assembly: 127701-6, Arm l: 312A63-3, Grip assembly: 122C01-7, Thumb screw M5x10: 265785-7, Grip assembly: 122D10-2, Pole complete: 140U91-6, Arm r complete: 140X19-2, Thumb screw M5x10: 265C34-0, Hex. bolt M8x65: 266886-4, Arm l: 312C73-2, Hex. nut M5: 931202-6, Retaining ring (int) r-15: 962055-2, Hook: 346317-0, Bit holder: 452947-8, +- bit 2-45: 784637-8, Plastic carrying case: 821524-1, Latch: 162302-3, Shaft: 325809-2, Handle: 451749-9, Plastic case lid: 453473-0, Battery BL1850B set: 197280-8, Battery cover: 450128-8

Battery (Sold separately)

196235-0 (BL1815N), 197254-9 (BL1820B), 197265-4 (BL1840B), 197280-8 (BL1850B), 197422-4 (BL1860B), 197599-5 (BL1830B), 632G12-3 (BL1830N)

Charger(Sold separately)

1910G0-1 (DC18WC), 194533-6 (DC18SD), 194621-9 (DC18SE), 195584-2 (DC18RC), 196426-3 (DC18SF), 196933-6 (DC18RD), 198444-7 (DC18RE), 199687-4 (DC18SH)