Micro long drills NACHI COSDML series 

Type

Metal drill bits

System of measurement

Metric

Set/Individual

Individual

Drill bit diameter/ size

0.1mm, 0.11mm, 0.12mm, 0.13mm, 0.14mm, 0.15mm, 0.16mm, 0.17mm, 0.18mm, 0.19mm, 0.2mm, 0.21mm, 0.22mm, 0.23mm, 0.24mm, 0.25mm, 0.26mm, 0.27mm, 0.28mm, 0.29mm, 0.3mm, 0.31mm, 0.32mm, 0.33mm, 0.34mm, 0.35mm, 0.36mm, 0.37mm, 0.38mm, 0.39mm, 0.4mm, 0.41mm, 0.42mm, 0.43mm, 0.44mm, 0.45mm, 0.46mm, 0.47mm, 0.48mm, 0.49mm, 0.5mm, 0.51mm, 0.52mm, 0.53mm, 0.54mm, 0.55mm, 0.56mm, 0.57mm, 0.58mm, 0.59mm, 0.6mm, 0.61mm, 0.62mm, 0.63mm, 0.64mm, 0.65mm, 0.66mm, 0.67mm, 0.68mm, 0.69mm, 0.7mm, 0.71mm, 0.72mm, 0.73mm, 0.74mm, 0.75mm, 0.76mm, 0.77mm, 0.78mm, 0.79mm, 0.8mm, 0.81mm, 0.82mm, 0.83mm, 0.84mm, 0.85mm, 0.86mm, 0.87mm, 0.88mm, 0.89mm, 0.9mm, 0.91mm, 0.92mm, 0.93mm, 0.94mm, 0.95mm, 0.96mm, 0.97mm, 0.98mm, 0.99mm, 1mm, 1.01mm, 1.02mm, 1.03mm, 1.04mm, 1.05mm, 1.06mm, 1.07mm, 1.08mm, 1.09mm, 1.1mm, 1.11mm, 1.12mm, 1.13mm, 1.14mm, 1.15mm, 1.16mm, 1.17mm, 1.18mm, 1.19mm, 1.2mm, 1.21mm, 1.22mm, 1.23mm, 1.24mm, 1.25mm, 1.26mm, 1.27mm, 1.28mm, 1.29mm, 1.3mm, 1.31mm, 1.32mm, 1.33mm, 1.34mm, 1.35mm, 1.36mm, 1.37mm, 1.38mm, 1.39mm, 1.4mm, 1.41mm, 1.42mm, 1.43mm, 1.44mm, 1.45mm, 1.46mm, 1.47mm, 1.48mm, 1.49mm, 1.5mm, 1.51mm, 1.52mm, 1.53mm, 1.54mm, 1.55mm, 1.56mm, 1.57mm, 1.58mm, 1.59mm, 1.6mm, 1.61mm, 1.62mm, 1.63mm, 1.64mm, 1.65mm, 1.66mm, 1.67mm, 1.68mm, 1.69mm, 1.7mm, 1.71mm, 1.72mm, 1.73mm, 1.74mm, 1.75mm, 1.76mm, 1.77mm, 1.78mm, 1.79mm, 1.8mm, 1.81mm, 1.82mm, 1.83mm, 1.84mm, 1.85mm, 1.86mm, 1.87mm, 1.88mm, 1.89mm, 1.9mm, 1.91mm, 1.92mm, 1.93mm, 1.94mm, 1.95mm, 1.96mm, 1.97mm, 1.98mm, 1.99mm

Material

Cobalt high speed steels (HSS-Co)

Bit style

Spiral flute

Point style

Standard, Split

Point angle

118°

Groove length

2mm, 2.5mm, 3mm, 4mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 15mm, 18mm

Shank type

Round (Straight shank)

Shank diameter

1mm, 1.5mm, 2mm

Full length

18.6mm, 21mm, 25mm, 30mm, 35mm, 33mm

Flute direction

Clockwise (right-handed)

Twist angle

22...31°

Is best used on

30...40 HRC, S45C, S50C, SCM NAK, SS400

Good for using on

30...40 HRC, AC, ADC, CU, FC, FCD, S45C, S50C, SCM NAK, SS400, SUS304, SUS316, SUS420

Not use on

50...65 HRC

Not recommended

40...50 HRC, Ti / Ni Alloy

Overall diameter

1mm, 1.5mm, 52mm, 2mm, 55mm

Overall length

18.6mm, 21mm, 25mm, 30mm, 35mm, 33mm