Smart fiber amplifier units Omron E3NX-MA series 

Type

Fiber Amplifiers

Standard sensing object

Transparent

Amplifier unit type

2-channel type, For sensor communications unit type

Light source (wave length)

Red LED (625nm)

Power supply voltage

10...30VDC

Sensitivity setting

Auto tuning, Manual

Number of control outputs

2, No

Output type

NPN open collector, PNP open collector, Two sensor outputs are allocated in the programmable logic controller (PLC) I/O table

Operation mode

Dark-ON, Light-ON

Response time

1ms, 100µs, 16ms, 450µs

Display type

7 segment LED

Display value

Dual digital display

Protection circuit

Output short over current protection circuit, Reverse output polarity protection, Reverse power protection circuit

Function

Automatic power control (APC), Bank switching, Dynamic power control (DPC), Eco mode, Hysteresis width, Power tuning, Resetting settings, Timer, Zero reset, Output reverse polarity protection, Sensor OFF setting

Communication

Available

Case material

Polycarbonate (PC)

Mounting type

Bracket mounting, DIN Rail mounting

Connection type

Pre-wired, Connector

Cable length

2m, 5m

Operating ambient

Standard

Ambient illumination

Incandescent lamp: 20, 000 lx max., Sunlight: 30

Ambient temperature (with no icing or condensation)

-25...55°C, 0...55°C

Ambient humidity (with no condensation)

35...85%RH

Approx. weight

75g, 20g, 25g

Overall width

10mm, 13.8mm

Overall height

33.5mm

Overall depth

76.9mm

Degree of protection

IP50

Representative standard

CE, IEC, UL

Separately accessories

DIN Track: PFP-100N, DIN Track: PFP-100N2, DIN Track: PFP-50N, End Plate: PFP-M, Mounting Bracket: E39-L143, Master Connector: E3X-CN21, Slave Connector: E3X-CN22, Distributed Sensor Unit: E3NW-DS, Sensor Communications Unit for CC-Link: E3NW-CCL, Sensor Communications Unit for EtherCAT: E3NW-ECT

Compatible device

E3NX-MA series