Spiral fluted tap series for blind hole YAMAWA SP OX series 

Type

Spiral fluted taps

System of measurement

Metric

Individual/Set

Individual

Tap material

High speed steel (HSS)

Coating

Oxide

Thread type

Metric, Unified, Whitworth

Thread size

M1.4x0.3, M1.6x0.35, M1.7x0.35, M2x0.4, M2.5x0.45, M2.6x0.45, M3x0.5, 3M0.6, M3.5x0.6, M4x0.7, M4x0.5, M4.5x0.5, M5x0.8, M6x1, M6x0.75, M7x1, M8x1.25, M8x1, M10x1.5, M10x1.25, M10x1, M12x1.75, M12x1.5, M12x1.25, M12x1, M14x2, M14x1.5, M14x1.25, M14x1, M16x2, M16x1.5, M16x1.25, M16x1, M18x2.5, M18x1.5, M20x2.5, M20x1.5, M20x1, M22x2.5, M22x1.5, M24x3, M24x1.5, M27x3, M27x2, M28x1.5, M30x3.5, M30x3, M30x2, M30x1.5, M32x2, M33x3.5, M36x4, No.2-56UNC, No.4-40UNC, No.5-40UNC, No.6-32UNC, No.8-32UNC, No.10-24UNC, No.10-32UNF, 1/4-20UNC, 1/4-28UNF, 5/16-18UNC, 5/16-24UNF, 3/8-16UNC, 3/8-24UNF, 7/16-14UNC, 7/16-20UNF, 1/2-13UNC, 1/2-20UNF, 9/16-18UNF, 5/8-11UNC, 5/8-18UNF, 3/4-10UNC, 3/4-16UNF, 7/8-9UNC, 7/8-14UNF, 1-8UNC, 1-12UNF, 1 1/2-6UNC, 1 1/2-12UNF, 1/8W40, 5/32W32, 3/16W24, 1/4W20, 5/16W18, 3/8W16, 7/16W14, 1/2W12, 5/8W11, 3/4W10, 7/8W9, 1W8, 1 1/4W7, 1 1/2W6

Applicable drill bit

1.1mm, 1.25mm, 1.35mm, 1.6mm, 2.05mm, 2.15mm, 2.5mm, 2.9mm, 3.3mm, 3.5mm, 4mm, 4.2mm, 5mm, 5.3mm, 6mm, 6.8mm, 7mm, 8.5mm, 8.8mm, 9mm, 10.2mm, 10.5mm, 10.8mm, 11mm, 12mm, 12.5mm, 12.8mm, 13mm, 14mm, 14.5mm, 15mm, 15.5mm, 16.5mm, 17.5mm, 18.5mm, 19mm, 19.5mm, 20.5mm, 21mm, 22.5mm, 24mm, 25mm, 26.5mm, 27mm, 28mm, 28.5mm, 30mm, 29.5mm, 32mm, 0.07", 0.089", 0.1015", 0.1065", 0.136", 0.1495", 0.159", 0.201", 0.213", 0.257", 0.272", 0.3125", 0.332", 0.368", 0.3906", 0.4219", 0.4531", 0.5156", 0.5312", 0.5781", 0.6562", 0.6875", 0.7656", 0.8125", 0.875"

Tap limit/ Class

P1, P2, P3, P4

Thread length

5.4mm, 6.3mm, 7.2mm, 8.1mm, 9mm, 11mm, 13mm, 15mm, 19mm, 23mm, 26mm, 33mm, 18mm, 39mm, 46mm, 52mm

Chamfer type

Taper

Chamfer threads

2.5P

Flute type

Spiral

Number of grooves/Flutes

2, 3, 4

Direction of thread

Clockwise (right-handed)

Total length

36mm, 42mm, 46mm, 52mm, 60mm, 62mm, 70mm, 75mm, 82mm, 88mm, 95mm, 100mm, 105mm, 115mm, 120mm, 130mm, 135mm, 145mm, 155mm, 125mm, 165mm

Under-neck length (Thread+Neck lengh)

12mm, 14mm, 16mm, 17mm, 21mm, 22mm, 26mm

Shank diameter

3mm, 4mm, 5mm, 5.5mm, 6mm, 6.2mm, 7mm, 8.5mm, 10.5mm, 12.5mm, 14mm, 15mm, 17mm, 19mm, 20mm, 23mm, 24mm, 25mm, 28mm, 30mm

Shank length

24mm, 27mm, 29mm, 26mm, 33mm, 36mm, 38mm, 42mm, 45mm, 48mm, 51mm, 50mm, 55mm, 60mm, 62mm, 67mm, 71mm, 25mm, 28mm, 31mm, 32mm, 58mm, 76mm

Driving part type

Square

Shank head size

2.5mm, 3.2mm, 4mm, 4.5mm, 5mm, 5.5mm, 6.5mm, 8mm, 10mm, 11mm, 12mm, 13mm, 15mm, 17mm, 19mm, 21mm, 23mm

Shank head length

5mm, 6mm, 7mm, 8mm, 9mm, 11mm, 13mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm

Hole type

Blind hole

Overall diameter

3mm, 4mm, 4.5mm, 5mm, 6mm, 6.5mm, 7mm, 8.5mm, 10mm, 12.5mm, 13mm, 14mm, 15mm, 17mm, 19mm, 18mm, 21mm, 25mm, 115mm

Overall length

36mm, 42mm, 46mm, 52mm, 60mm, 62mm, 70mm, 75mm, 82mm, 88mm, 95mm, 100mm, 105mm, 115mm, 120mm, 130mm, 135mm, 145mm, 155mm, 125mm, 165mm

Representative standard

JIS