Type |
Fiber Amplifiers |
Standard sensing object |
Transparent |
Amplifier unit type |
For sensor communications unit type, 2-channel type |
Light source (wave length) |
Red LED (625 nm) |
Power supply voltage |
Supplied from the connector through the communication units. (Communication units sold separetely) |
Sensitivity setting |
Auto tuning, Manual |
Number of control outputs |
No |
Output type |
Two sensor outputs are allocated in the programmable logic controller (PLC) I/O table |
Input type |
No |
Response time |
1 ms, 100 µs, 16 ms, 450 µs |
Display type |
7 segment LED |
Display value |
Dual digital display |
Protection circuit |
Output short over current protection circuit, Reverse power protection circuit |
Function |
Automatic power control (APC), Bank switching, Dynamic power control (DPC), Eco mode, Hysteresis width, Power tuning, Resetting settings, Sensor OFF setting, Timer, Zero reset |
Communication |
Available |
Case material |
Polycarbonate (PC) |
Mounting type |
Bracket mounting, DIN Rail mounting |
Connection type |
Connector |
Operating ambient |
Standard |
Ambient illumination |
Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max. |
Ambient temperature (with no icing or condensation) |
0...55 °C |
Ambient humidity (with no condensation) |
35...85 % |
Approx. weight |
25 g |
Overall width |
13.8 mm |
Overall height |
33.5 mm |
Overall depth |
76.9 mm |
Degree of protection |
IP50 |
Representative standard |
CE, IEC, UL |
Standard accessories |
Not equipped |
Separately accessories |
DIN Track: PFP-100N, DIN Track: PFP-100N2, DIN Track: PFP-50N, Distributed Sensor Unit: E3NW-DS, End Plate: PFP-M, Mounting Bracket: E39-L143, Sensor Communications Unit for CC-Link: E3NW-CCL, Sensor Communications Unit for EtherCAT: E3NW-ECT |
Compatible device |
E3NX-MA series |