Standard type 5-phase stepper motor Autonics AK series

Manufacturer: AUTONICS

Item Status: Available

Customer care:

Ms. Thu 0989 465 256

0989 465 256

1.728

Series: Standard type 5-phase stepper motor Autonics AK series

Features of Standard type 5-phase stepper motor AUTONICS AK series

Compact and lightweight design with high torque, speed, and accuracy

Small size suitable for compact sized systems

Low cost to save money Win (AK-B Series)

Brake works when receiving power to the brake line (AK-B Series)

Frame size: - AK : 24mm, 42mm, 60mm, 85mm - AK-B : 42mm, 60mm, 85mm

General specifications of Standard type 5-phase stepper motor AUTONICS AK series

Type	Stepper motors
Phase-stator windings	5 phase
Max. holding torque	0.018N.m, 0.028N.m, 0.13N.m, 0.18N.m, 0.24N.m, 0.42N.m, 0.83N.m, 1.66N.m, 2.1N.m, 4.1N.m, 6.3N.m
Rotor moment of inertia	4.2x10^-7kg.m², 8.2x10^-7kg.m², 35x10^-7kg.m², 54x10^-7kg.m², 68x10^-7kg.m², 175x10^-7kg.m², 280x10^-7kg.m², 560x10^-7kg.m², 1400x10^-7kg.m², 2700x10^-7kg.m², 4000x10^-7kg.m²
Rated current	0.75A, 1.4A, 2.8A
Standard step angle (Full/half)	0.72°, 0.36°
Shaft diameter	5mm, 8mm, 14mm
Shaft length	13.5mm, 18mm, 22.5mm, 35mm
Number of shafts	Single, Double
Shaft type	D-cut shaft
Max. thrust shaft load	Updating
Electric connection method	Pre-wire
Mounting method	Flange mounting
Mounting orientation	Horizontal, Vertical
Operation ambience	Indoor
Ambient temperature	-10...50°C
Ambient humidity	35...85%
Approx. weight	80g, 120g, 250g, 300g, 400g, 600g, 800g, 1.3kg, 1.7kg, 2.8kg, 3.8kg
Flange size	24x24mm, 42x42mm, 60x60mm, 85x85mm
Degree of protection	IP30
Representative standard	CE, EAC
Drive (Sold separately)	MD5-HD14, MD5-HF14, MD5-ND14, MD5-HF28

Installation guide Standard type 5-phase stepper motor Autonics AK series Contact mailbox baoan@baoanjsc.com.vn or phone number 0989.465.256

Document of Standard type 5-phase stepper motor Autonics AK series

standard-type-5-phase-stepper-motor-autonics-AK-seri.pdf

standard-type-5-phase-stepper-motor-autonics-AK-ser.pdf

Comment about product

WEBSITE DIGITAL

24/7 online lookup: price, stock quantity - delivery time

Select products by parameters, equivalent products

Make estimates, find products with better prices…

Other products

Standard type 5-phase stepper motor Autonics AK series

Hollow shaft type 5-phase stepper motor Autonics AHK series

Closed-loop stepper motors LEADSHINE CS series

Hybrid stepping motors LEADSHINE 42HS series

What is an optical sensor?

Technology solutions

HRS Chiller - compact - efficient

Cung cấp, lắp đặt tủ điện cấp nguồn cho container lạnh

Model	Brief specs	Item Status	Price, Order
A16K-M569	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Có sẵn	Check
A41K-M599	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Có sẵn	Check
A41K-M599-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A41K-M599W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A41K-M599W-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A4K-G564	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-G564W	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A3K-S545W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.24N.m; Rotor moment of inertia: 68x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A3K-S545W-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.24N.m; Rotor moment of inertia: 68x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A41K-G599	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A41K-G599-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A41K-G599W	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A41K-G599W-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 4.1N.m; Rotor moment of inertia: 2700x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A2K-S544W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.18N.m; Rotor moment of inertia: 54x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A2K-S544W-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.18N.m; Rotor moment of inertia: 54x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A3K-M545	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.24N.m; Rotor moment of inertia: 68x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A3K-M545W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.24N.m; Rotor moment of inertia: 68x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A3K-S545	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.24N.m; Rotor moment of inertia: 68x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A3K-S545-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.24N.m; Rotor moment of inertia: 68x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A21K-M596W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A21K-M596W-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A2K-M544	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.18N.m; Rotor moment of inertia: 54x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A2K-M544W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.18N.m; Rotor moment of inertia: 54x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A2K-S544	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.18N.m; Rotor moment of inertia: 54x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A2K-S544-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.18N.m; Rotor moment of inertia: 54x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A21K-G596	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A21K-G596-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A21K-G596W	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A21K-G596W-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A21K-M596	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A21K-M596-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 2.1N.m; Rotor moment of inertia: 1400x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A1K-M543	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.13N.m; Rotor moment of inertia: 35x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A1K-M543W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.13N.m; Rotor moment of inertia: 35x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A1K-S543	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.13N.m; Rotor moment of inertia: 35x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A1K-S543-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.13N.m; Rotor moment of inertia: 35x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A1K-S543W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.13N.m; Rotor moment of inertia: 35x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A1K-S543W-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.13N.m; Rotor moment of inertia: 35x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 18mm	Liên hệ	Check
A16K-G569W	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A16K-G569W-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
02K-S523	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.018N.m; Rotor moment of inertia: 4.2x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 13.5mm	Liên hệ	Check
02K-S523W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.018N.m; Rotor moment of inertia: 4.2x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 13.5mm	Liên hệ	Check
04K-S525	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.028N.m; Rotor moment of inertia: 8.2x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 5mm; Shaft length: 13.5mm	Liên hệ	Check
04K-S525W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.028N.m; Rotor moment of inertia: 8.2x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 5mm; Shaft length: 13.5mm	Liên hệ	Check
A16K-G569	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A16K-G569-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-S566W-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-G566	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-M566-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-M566W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-M566W-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-S566	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-S566-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-S566W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A63K-M5913	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A63K-M5913-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A63K-M5913W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A63K-M5913W-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A8K-G566W	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A8K-M566	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.83N.m; Rotor moment of inertia: 280x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-S564W	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-S564W-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A63K-G5913	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A63K-G5913-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A63K-G5913W	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A63K-G5913W-S	Standard step angle (Full/half): 0.72°, 0.36°; 2.8A; Max. holding torque: 6.3N.m; Rotor moment of inertia: 4000x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 14mm; Shaft length: 35mm	Liên hệ	Check
A4K-M564	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-M564-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-M564W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-M564W-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-S564	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A4K-S564-S	Standard step angle (Full/half): 0.72°, 0.36°; 0.75A; Max. holding torque: 0.42N.m; Rotor moment of inertia: 175x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A16K-M569-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Single; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A16K-M569W	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check
A16K-M569W-S	Standard step angle (Full/half): 0.72°, 0.36°; 1.4A; Max. holding torque: 1.66N.m; Rotor moment of inertia: 560x10^-7kg.m²; Shaft type: D-cut shaft; Number of shafts: Double; Shaft diameter: 8mm; Shaft length: 22.5mm	Liên hệ	Check

Standard type 5-phase stepper motor Autonics AK series

Series: Standard type 5-phase stepper motor Autonics AK series

Features of Standard type 5-phase stepper motor AUTONICS AK series

General specifications of Standard type 5-phase stepper motor AUTONICS AK series

Document of Standard type 5-phase stepper motor Autonics AK series

Policies

Bao An Automation